QSDK/ipq5018/2T2R/Bluetooth BT5.1 supporting QCN9074/industrial wifi6 module

QSDK/ipq5018/2T2R/Bluetooth BT5.1 supporting QCN9074/industrial wifi6 module

Qualcomm ipq5018 and ipq6000 chip comparison:

Qualcomm IPQ6000 is a quad core 1.2G processor, while Qualcomm IPQ5018 uses a 64 bit 1G dual core A53 architecture CPU+single core NPU.

Both are router processors. The IPQ5000 is weaker than the IPQ6000 of the AX5. The CPU integrates 256M memory. The 5G chip is QCN6102, which is stronger than the AX5. The 5G supports 160Mhz. The AX5 only supports up to 80MHz.

Only one channel of 160MHz can be used in China, and the interference of surrounding weather radars should also be checked. If interference is found, the router should actively avoid it and reduce it to 80Mhz. In addition, because the transmission distance of 160Mhz is shorter and the terminal support is not much, the actual use is subject to large restrictions. At present, most terminals only support 80Mhz, that is, in the case of 5G, the speed can only reach 1200Mbps.

DR5018

IPQ5018, 802.11ax,wifi 6e,QCN9074,

2X2 2.4G support 2x WiFi 6E Card support BT5.1

https://www.wallystech.com/Routerboard/DR5018-wifi6-Qualcomm-IPQ5018-2T2R-2.5G-ETH-port-802.11AX-MU-MIMO-OFDMA-supporting-QCN9074-wifi-card.html

Dual-core ARM 64bit A53@1.0GHz Processor

512MB DDRL3L System Memory

4MB NOR Flash, 128MB NAND Flash

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

Support BT5.1

M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

M.2 Card Slot for QCN9074 WIFI 6E Card

This is Tina from Wallys, we are a Mfg of networking devices like cellular routers, NICs, CPE/AP, antennas etc

Our current products portfolio are based on Qualcomm and Mediatek platforms

Hardware customization and software integration is our speciality, OEM/ODM turnkey solution, aslo, we can work with you under JDM mode to develop new products together

By sending this text, i am seeking an potential business opportunity with you

If you are interested or looking for any networking hardwares, feel free to share me your detailed requirements, i can do a proposal accordingly

Thanks for your prompt attention and looking forward to your favorable feedback

Sincerely,,,

BY:Wallys Communications (Suzhou ) Co., LTD

EMAIL:​sales3@wallystech.com